Nice starter system - compressor is quiet but the instructions with the compressor are pretty limited. Out of the box the regulator is set for a high psi air flow, which usually needs to be brought down to 20-30 psi range. You can do that by letting the air tank fill up (the compressor stops at 60 psi) and then turning the regulator dial (the black thingy) in the "-" direction so the pressure gage reads 20-30 psi. If not reduced, the air tank will empty pretty fast and the compressor has a hard time keeping up with the demand. The one missing star is for poor instructions.
- Aemal Khattak
air volume (CFM) and pressure (PSI) than any airbrush demands and is much quieter than either the Paasche D500 or the ..
No comments:
Post a Comment